MacOS Catalina is one of the best operating system in 2019 and this time Apple included tons of handy features in MacOS Catalina that one of that feature is SideCar. However, with SideCar, you can make your iPad, iPod as a second screen display. So, this is what people are curious to know more about MacOS Catalina. Besides that, Apple has released its new product called iPhone 11, iPhone 11 Pro, and iPhone 11 Max. The interesting thing about these three products is, it has three rear cameras which are Wide, Ultra Wide, and Telephoto. But in this article, I am going to guide you How to Reset MacOS Catalina Forgotten Password. This article is for those users who have installed Catalina and set a user password, after a few days or weeks they forgot the password and on that time my method will work for you.
Suppose, you have installed MacOS Catalina on PC-Hackintosh or you have installed MacOS Catalina on virtual Machine and you have set a password but the problem is here you have forgotten what was your password. to reset your password in macOS is not that much harder but when you are in Windows Operating system then it is difficult to reset your forgotten password. Moreover, if you have installed MacOS Catalina on Virtualbox using windows then it is the best platform to enjoy the Mac Operating system on Windows. Or you have installed MacOS Catalina on Vmware using your Windows because a windows user has only one way to use MacOS Catalina is to install on virtualization software. Therefore, if you are Windows user like me then reset macOS Catalina forgotten password through using the virtual machine that you have installed macOS Catalina inside.
How to Reset MacOS Catalina Forgotten Password
Here, I will show you the easy way which you can change or reset your password using one step, the goodness of Mac Operating system is that you can reset your password easily without using any third-party software. So let’s start
How to Reset MacOS Catalina Forgotten Password?
Installing macOS Catalina on a different platform is quite difficult because it will need some requirements files. So, after installation, you might face a problem with Mouse and Keyboard Stuck or you want to fix the MacOS Catalina Screen resolutionbut the main issue is how to reset MacOS Catalina forgotten password. Therefore, to reset your password follow the below steps and focus on each step in order to not face problems further.
To reset your forgotten password you will need to turn off the system in case it is turn on.
Step 2: Boot to the Recovery
Now, to come into MacOS Catalina recovery, turn on the system and hold Command + R until the Apple logo appears.
#3: On the welcome screen, select the language and click on Continue.
#4: When you reach to MacOS Utilities then go to Utilities menu tab and click on Terminal.
#5: In the terminal window, type resetpassword and hit the return key.
#6: If you have created multiple user accounts then it will appear below, therefore, select the account that you have forgotten the password and you want to reset the password.
Step 7: Create A New Password
Once you select the account then MacOS will ask you to create a new password, therefore, type a new password and provide a password hint too.
Step 8: Reboot the System
While you set a new password then go ahead and restart your system, after that, type your new password and login to MacOS Catalina.
The System was Unable to Unlock your Login Keychain
Firstly, a question will appear on your mind what is keychain? So, login keychain is the password management in the Apple that stores all the passwords of servers, Applications, and even sensitive information. Therefore, after resetting the MacOS Catalina password, you may encounter with the keychain. So, on that time you have to provide keychain password in case you remember the password otherwise create a new keychain login and enter the password. I prefer you to create a new keychain if you forgot the password.
Therefore, click on the Create New Keychain option and create a new keychain with a new password.
That’s all about How to reset macOS Catalina forgotten password and in this article, you have learned the best and easy step that you can reset the password with a few minutes. and this step will work for all Mac operating system like MacOS Mojave, MacOS High Sierra, and etc. Therefore, if you are using any Mac operating system and you forgot the password then apply the above step and reset your password. Moreover, if our article was helpful for you then don’t forget to give your feedback.
Apple company is one of the best mobile company among all companies, as legions of people love to use iPhone and in 2019 Apple released the new product called iPhone 11, iPhone 11 Pro, and iPhone 11 Max. these three products are awesome and if we discuss its camera then it’s amazing. iPhone is taking high-quality pictures and videos due to that people love to use it as a digital camera. However, the new iPhone 11 with three rear-facing cameras and Apple added more new features in the camera which I will complete in this article. Here, you will learn the New iPhone 11 Camera Features Review with the best guide and complete explanation.
Although iPhone 11 has three cameras and the user should take the advantage of its array of three rear-facing cameras, However, iPhone has included several new photo and video features designed to improve your shooting experience and give good results for both beginning and advanced photographers. Therefore, a photographer can use iPhone cameras in party and wedding ceremony because this time Apple added tons of new features which are handy and amazing. So, get know about interesting features of iPhone 11 Camera and on the dot, turn on your iPhone camera and practice the features with me.
iPhone 11 Camera Features Review
The new iPhone Camera features are Ultra Wide, Smarter Selfies, Change the aspect ratio, Smooth and Precise zooming, Live rendering, and many more. So, you will learn one by one in this article, therefore, focus on each feature and use your iPhone as a digital camera.
Apple iPhone 11 Camera Specs
12MP Standard wide-angle camera, 26mm equivalent, f/1.8 aperture, OIS, and focus pixels
Ultra-wide-angle camera with 12MP, 13mm-equivalent, f/2.4 lens
12MP telephoto camera, 52mm-equivalent, f/2 lens and OIS on the Pro and Pro Max
New Night mode for low-light shooting
Up to 4K/60fps Video with extended dynamic range and stabilization
12MP front-facing camera with FaceID
Apple iPhone 11 Camera Features Review
Now, we will discuss the new iPhone camera features and I will let you know about the most useful features that you have to know before using the iPhone 11 family phone. let’s start
1: Ultra Wide
The first and handy feature that you will need when you are in a place that you want to take a full area shoot but you haven’t that much space, on that time you can use the ultra-wide camera feature to take full area picture. However, both the iPhone 11 and iPhone 11 Pro have the new ultra-wide cameras on the backside and having 12MP, (f/2.2) camera is equivalent to a 13mm DSLR lens. plus, the ultra-wide feature has a 120-degree field of view, it means you can take a shot over 120-degree which is capable of fitting in a shot.
Wide Camera
Ultra Wide Camera
So, if you want to use ultra-wide lens feature then it is easy on iPhone 11, simply tap the 1x button to switch to the 0.5x ultra-wide lens and on iPhone 11 pro, just click the 0.5x button. again I will guide you on how to use it.
How to Switch between Wide, Ultra-Wide and Telephoto Cameras
The new iPhone user, open the camera app from your phone.
On the camera screen, you will see .5, 1x, and 2. Therefore, tap 0.5x, 1, or, 2 (if you are using iPhone 11 Pro) then tap on 2 to switch between cameras.
After that, tap and hold on the camera selection buttons to cause the zoom dial to appear on the screen.
Then, simply drag the zoom dial back and forth to have a smooth transition between the wide, ultra-wide, and telephoto cameras.
2: Grab a video with QuickTake
The new and handy feature that included in iPhone 11 and iPhone 11 Pro called QuickTake. However, when you open camera app then you are in photo mode, where you don’t need to switch out of photo mode although this feature let you record videos without switching out of photo mode. it means you can make a quick video even you are in photo mode.
How to use QuickTake feature
Firstly, run the Camera app on your iPhone 11.
To take a quick video you need to tap and hold on the shutter button with the camera in Photo mode. then,
your recording will begin now. if you want to stop the recording then move your finger toward left, in this case, your video will be stopped.
Move the recording button toward lock icon on the right side.this will keep your recording going although when you lift your finger from your iPhone.
3: Brust Shooting
As you get about QuickTake feature and if holding down the shutter button it will make a quick video then what about the next feature Brust shooting. have you know about this feature although this feature is added in Samsung Galaxy S9, therefore, you might know somehow.
iPhone 11 Brust Mode
Brust Mode
Well, if you want to take vertical photos then move left from the shutter button and for horizontal photos move down instead. However, you cant change the default setting because there is no way to change the setting.
How to take Brust Photos
Open Camera app on your iPhone.
then, press and move the shutter button to the left, this will start brusting photos.
To stop taking brust photo, you need to lift your finger from the shutter button.
4: Record Video While Taking Photo
Before iPhone 11, you can take a screenshot while recording video at the same time by tapping the shutter button. but When Apple released the new iPhone 11 and iPhone 11 Pro, then they added a new feature QuickTake. this feature let you record video and during recording, you can take a photo by holding down the shutter button.
Recording video While Taking Picture
The new feature QuickTake works for all front and rear cameras. but one thing I should tell you which is about aspect ratio. if your photos are set to 4:3 then QuickTake video will be the same as aspect ratio photos. for 16:9 videos, you will need to set the photo aspect ratio to this point.
5: Smarter selfies
The new iPhone 11 and iPhone 11 Pro come with 12MP front-facing cameras, However, you will not get 12MP for every selfie as usual. The goodness is here, if you hold your iPhone 11 vertically then the image sensor zooms into 7MP selfie. but you can tap the expand button on the screen to zoom out for the full Megapixel which is 12MP.
iPhone 11 Selfie
However, if you want to take a selfie horizontally then the camera will be zoom out to 12MP automatically because with horizontal you will get more space. if you want to cut other people and want to take only your picture then you can change the camera into vertically and it will be set 7MP and it will be zoom in.
6: Change the aspect ratio to 16:9
On the previous iPhone model you have two aspect ratio that you can choose from 4:3 (rectangle) or 1:1 (square), this both aspect ratios are on their own shooting modes.
But in the new iPhone 11 and 11 Pro with the new camera app, the aspect ratio grouped into single-mode and this time apple added new aspect ratio which is 16:9. however, to change the aspect ratio, swipe up the screen to bring out a new row of camera settings. then you can change the aspect ratio to 16:9.
7: Controlling Night mode
The amazing feature that added in iPhone 11 and iPhone 11 Pro is Night Mode function. this feature will detect when the scene is dark and you can choose the night mode for your picture. SO, the Night Mode icon appears next to the flash icon and it shows you how long you need to hold still for. Therefore, tap the shutter button and a meter will appear and count down from the recommended.
Simple picture
iPhone 11 Night Mode
Although you can override the automatic Night Mode exposure to turn it off or increase the exposure time to the maximum, simply you can tap Night Mode icon to do it.
That’s all about iPhone 11 Camera Features Review and this time Apple added tons of features to the new product and all of them are amazing and handy. Therefore, if you don’t have iPhone 11 then I prefer you to buy it now and use all the camera features. Moreover, if you like our article then don’t forget to give your feedback.
As Apple is releasing an operating system per year and one of the best operating system called MacOS Mojave. MacOS Mojave is a friendly and best operating system, although it has tons of new features and that is handy for Mac users. However, you are using Mac computer or Hackintosh PC then you are curious to know about How to Install MacOS Mojave on PC-Hackintosh. therefore, in this article, I am going to guide you with best and easy steps that you can easily install MacOS Mojave on Hackintosh. So, we will complete the installation by using the Clover EFI Bootloader, but how you can do it, you will learn here.
Installing the Mac operating system on Mac computer is quite easy but if we think about Windows then it might be difficult and it will need more information and knowledge. However, we have such platforms that allow us to install a Mac operating system on windows like Virtualbox and Vmware Software. these two virtual machines are the best chance to use and install any Mac Operating system, Therefore, if you are Windows user then follow the below links and install the Mac Operating system on virtual machines.
How to Install MacOS Mojave on PC Hackintosh
Before, going to install MacOS Mojave 10.14 on PC-Hackintosh using Clover EFI Bootloader, you have to complete the required files which we will mention below, after that, follow step by step and you will be able to install MacOS Mojave.
As I mentioned we will install MacOS Mojave on Hackintosh using Clover EFI Bootloader, So, it will be somehow difficult and you might get confused but don’t worry I will guide you step by step with good explanation.
Required Files:
Download MacOS Mojave with your developer account on your Hackintosh OR
Of course to install MacOS Mojave you need to download Mojave dmg file then you can install it on your PC. downloading MacOS Mojave has two way, first, if you are Mac user then you can download it directly from App Store with your developer account if you are using Windows operating system then you don’t have developer account, therefore, download MacOS Mojave dmg file from above link.
Step 2: Create a Bootable USB for MacOS Mojave
Well, to install MacOS Mojave whether on Hackintosh or Virtual Machine, firstly, you will need to download MacOS Mojave image file which I mentioned above, therefore, download MacOS Mojave dmg file. After you downloaded then you have to create a bootable USB for MacOS Mojave. creating MacOS Mojave bootable USB is good for having a clean installation on PC although you can install without USB if you go with it then you will have the best MacOS Mojave installation.
You might know how to create MacOS Mojave Bootable USB Installer if you know then do it yourself if you don’t know then click on the link below and follow the steps. that way, you can create a bootable USB for MacOS Mojave.
As I have uploaded an article on How to Create MacOS Mojave Bootable USB Installer, therefore, I am not going to show you the steps, in this case, you have to read that article. Otherwise, follow the below steps to create a MacOS Mojave bootable USB.
#1: To create a bootable USB for MacOS Mojave you will need to have 16GB USB flash drive, therefore, insert your USB drive to your computer.
#2: Then, use Command key + Space for the spotlight and search Disk Utility and press Enter key.
#3: Now, select your USB drive from the left side and click on Erase from the top menu. Afterward, follow this:
Give a proper Name for USB Partition.
Select Mac OS Extended (Journaled) for Format.
And select GUID Partition Map for Scheme.
#4: Once you are done then click on Erase button and wait for a while then click on Done and close Disk Utility page.
#5: Open the Spotlight and search for Terminal, after that, copy and paste the below code to terminal and press Enter key. afterward, it will ask you to type your password and press enter key. While you press the Enter key then you will be asked to Enter Y key for confirmation, therefore, Press Y and wait for a while and close Terminal.
To run Clover Configurator, you need to download it on your PC.
Now, open spotlight and search Clover Configurator and press Enter.
Then, select the Mount EFI option from the left side.
Afterward, select the EFI on install MacOS Mojave Beta and click on Mount Partition.
Type your User password.
While you Mounted EFI Partition then an EFI folder will be created to your desktop screen automatically.
Therefore, open EFI external folder.
You have to copy the EFI file into an external folder.
After you copied then Eject the external EFI folder.
You are done with this step and you have created EFI file of MacOS Mojave in a USB drive and you are ready to install MacOS Mojave on Hackintosh.
Step 4: Create Post-Install USB Drive
Now insert 4GB USB flash drive for creating post-installation and click on Go > Utilities and open Disk Utility. After that, follow the below steps.
In Disk Utility, select your USB drive from the left side of the window and click on the Erase button from the top menu.
Then, give a Name like (Post-Install), select Mac OS Extended (Journaled) for Format and select GUID Partition Map for Scheme.
After that, click on Erase button and wait for a while and click on Done then close disk utility page.
While the Post-install partition is done then copy and paste all the fixes drivers into Post-Install USB drive, after that, Eject the USB drive folder.
So, now the USB drive is ready to boot and we have copied all the files to Post-Install USB drive and the USB is ready to install macOS Mojave on Hackintosh but before going to install MacOS Mojave you have to configure BIOS setting.
Step 5: Configure BIOS Setting
#1: Now, restart your PC and press Delete button to bring the BIOS setting.
#2: Go to Save and Edit menu tab and select Load Optimized Defaults and press Enter key. after that select yes option. Once again click on Save and Edit set up on the same page and click Yes, afterward, your computer will restart automatically.
#3: Now, press Delete key to bring BIOS settings.
#4: Go to BIOS tab and Disabled fast boot option. then select 2x for Mouse Speed, then select Other OS for Windows 8/10 features, then select Legacy for Storage Boot option control, and select UEFI for other PC1 devices.
#5: Then, go to Peripherals tab and select PCI 1 Slot for Initial Display Output, then Disabled Intel platform trust technology (PTT).
#6: On the same page select USB Configuration then Enabled XHCI Hand-Off.
#7: Come back and select SATA And RST Configuration, then make sure you have selected AHCI for SATA Mode Selection.
#8: Now go to Chipset tab and Disabled VT-d.
#9: At last go to Save and Exit tab and click on Save and Exit setup and click on yes button.
So, you have configured BIOS setting successfully, and you are ready to install MacOS Mojave on Hackintosh PC.
Step 6: Install MacOS Mojave on PC Macintosh HD
Now everything is done and you have configured BIOS setting, therefore, now it is time to install MacOS Mojave from USB flash drive. so, insert the USB drive and restart your computer, after that, go to Boot Menu and select your USB to install MacOS Mojave. Then follow the below steps.
#1: On welcome page select Option and type -v nv_disabled=1_for Boot Args and press enter key.
#2: Now, Boot MacOS install from install MacOS Mojave, therefore, click on Apple Logo and press enter.
#3: Bypass black and white text and wait for a while.
#4: Here, select your language and continue.
#5: Then, select Disk Utility and continue.
#6: Now, go to View menu tab and click on Show all devices.
#7: Afterward, select the USB that you want to boot MacOS Catalina and click on Erase option from the top menu. then give a Name to the USB, select APFS for Format, and select GUID Partition Map for Scheme and click on Erase button and wait to complete the partition and click on Done. at last close the disk utility folder.
#8: Now, select Install MacOS and continue.
#9: click on Continue.
#10: Then, agree to the terms and continue.
#11: After that, select Macintosh HD and install MacOS Mojave on Macintosh HD.
So, you have installed MacOS Mojave on Macintosh HD successfully. now Boot MacOS Mojave to Macintosh HD.
Step 7: Boot MacOS Mojave from Macintosh HD
Press F12 for Boot menu and select your USB drive and press Enter.
Then, select option and type -v nv_disabled=1_for Boot Args and press enter key.
This time boot MacOS install from Macintosh HD, therefore, select second Apple Logo and press Enter key.
Wait for some minutes to install MacOS Mojave on Macintosh HD.
Now your Computer will restart.
Again press f12 for Boot menu and select your USB drive and press enter.
Now, select option and type -v for boot args and press enter key.
Then Boot MacOS from Macintosh HD and press enter key.
Step 8: Install macOS Mojave on Hackintosh
Select your country and continue.
Select your keyboard layout and continue.
Then, select My computer is not connect to the internet and continue.
On data and privacy click continue.
Select don’t transfer any information and click continue.
Agree to the terms and condition.
Now create a new user for computer, therefore, give a Full name, Account name, password, and Password Hint. then click on Continue.
On express set up click on Continue.
Now select your theme whether light mode or dark mode and click on continue.
After that, it will be setting up your MacOS.
You have installed MacOS Mojave on PC-Hackintosh HD successfully, now you can use MacOS Mojave on your PC Hackintosh.
That’s all about How to install macOS Mojave on PC-Hackintosh, So, I have explained everything and all the steps you need is included in this article. So, follow each step one by one and don’t miss any line because you will face problems during the installation. Moreover, I hope the article was helpful for you and if you have any question then feel free to ask me in the comment box.
One of the best ways to have a clean MacOS Mojave installation is to create a bootable USB drive. although you can install it out of USB with its image file, Once you create MacOS Mojave Bootable USB Installer then you can install it again and again with the same USB Flash Drive. However, you know MacOS Mojave is the handy and best operating system among all Mac, thus Mojave has cool features which help users to feel at home while working on files. So, as you are curious to get the idea on How to Create MacOS Mojave Bootable USB Installer using your Windows PC, therefore, In this article, I am going to show you the easy and best method that you can easily create a bootable USB for any Mac operating system.
After creating MacOS Mojave bootable USB then you can install Mojave on your Mac and Windows, although installing MacOS Mojave on Mac PC is not a difficult task but if we try to install it on Windows PC then it will need some requirements thus you can install it on your computer. If you are Windows user then you have the best platform such as Virtualboxand Vmwaresoftware where you can install any Mac operating system but before going to install you have to download its image file for a virtual machine. otherwise you can’t complete the installation on windows. if you don’t know then follow the below heading and install MacOS Mojave on Virtualbox or Vmware Workstation.
How to Create MacOS Mojave Bootable USB Installer
In this article, you will learn two methods that help you to create a bootable USB installer for MacOS Mojave, the first method you might hear about TransMac and Unibeast software that allows us to create a bootable USB but for that, you have to install virtualization software then you can use that software.
And the second method I am going to show you the easy and best way that using a terminal you can copy MacOS Mojave to USB and you can create a bootable USB for Mojave.
Once you downloaded TransMac software and MacOS Mojave on your PC, after that, you have to install TransMac software in order to create a bootable USB Installer. therefore, follow the below steps and complete the installation.
Open Download folder and find TransMac setup, afterward, double-click on the setup file.
The first window will be welcome page, therefore, click Next.
Agree to the terms of the license and click Next.
If you want to change the default location then select a new location and go ahead.
Create TransMac shortcuts icon on the Start Menu and desktop screen and go ahead.
Click Next.
Now the installation is ready to go, therefore, click on Install button.
Wait for some minutes to complete the installation.
The TransMac installed successfully on your PC, now click Finish.
Step 2: Create MacOS Mojave Bootable USB Installer
Now you have TransMac software on your PC and you have downloaded MacOS Mojave dmg file, then it is time to start creating MacOS Mojave Bootable USB Installer on windows. before going to begin, make sure you have inserted 16GB USB Flash Drive on your PC then follow the below steps.
#1: To begin, Run TransMac as Administrator. therefore, right-click on the TransMac icon and click on Run As Administrator.
#2: While you run the TransMac then you will see the list of drives on the left side of the window. therefore, select the USB drive that you want to make a bootable for MacOS Mojave 10.14. Once you select it then right-click on the drive and click on Restore with Disk Image.
#3: Then, you will see the warning pop up window, here, simply click on Yes button to go ahead.
#4: Now, select the MacOS Mojave dmg file that you downloaded later, to select MacOS Mojave, click on three dots and select MacOS Mojave dmg file and click on OK.
#5: Again it will give you a warning, therefore, click on Yes button.
#6: Now wait for some minutes to format your USB Flash Drive and after that, it will copy MacOS Mojave on USB automatically.
Method 2: Use Terminal to Copy MacOS Mojave to USB Drive
The second method you will make a bootable USB for MacOS Mojave through Terminal, but before going to start, make sure you have MacOS Mojave dmg file, after that insert your USB flash drive and format it with Disk Utility. So, it means you have to create a USB partition.
However, you can copy MacOS Mojave dmg file to USB through software that I mentioned in method one but in second method you will copy MacOS Mojave to USB with the help of the terminal.
Step 1: Create a USB partition with Disk Utility
Before going to create a bootable USB for macOS Mojave using Terminal, you will need to create USB partition with disk utility. SO, it means you have to erase the USB flash drive. after that, you can able to create MacOS Mojave bootable USB Installer. therefore, follow the below steps to erase the USB and create a Partition.
Firstly, connect 16GB USB flash drive to your PC.
Now open Spotlight and search Disk Utility and run it.
In disk utility, select your USB flash drive from the left side.
Then, click on Erase from the top then give a Name, select Mac OS Extended (Journaled) for Format, and select GUID Partition Map for Scheme. at last click Erase button.
Now click on Done and close disk utility window.
Step 2: Copy MacOS Mojave to USB
Once you have created a USB Partition then here I will show you how you can use a terminal to copy MacOS Mojave to USB flash drive. although you have various kind of software that allows you to create a bootable MacOS Mojave. However, you can follow the first method but this method is easy and you don’t need to download and install any software. So, follow the below step and copy MacOS Mojave dmg file to a USB drive.
#1: At the first step, open Spotlight and search Terminal and open it.
#2: Now copy the below code and paste it in terminal and press return.
#4: While you paste the code then it will ask you to type your user password, after that, type Y to continue.
Now, wait for some minutes to copy the macOS Mojave to USB flash drive.
This is the second method, that you can make a bootable USB installer for MacOS Mojave with terminal and one line of code. So, I hope this method work for you and you haven’t get confusion.
Install MacOS Mojave on Virtualbox on Windows
Once you created MacOS Mojave bootable USB installer, then you have the best chance to test Mojave without installing on your original operating system. However, Virtualbox is one of the best virtualization software that you can install any Mac operating system easily but for that, you have to download a virtual machine image file. Without MacOS Mojave image file you cant install Mojave on Virtualbox. this platform is the best for Windows user because they don’t have any other solution to go with it. if you don’t know how to install MacOS Mojave on Virtualbox on windows the click on the below link and follow the steps.
Installing MacOS Mojave on Vmware is same with Virtualbox but to install a Mac operating system on VMware you need to install Vmware tools for Mojave then you need to create a new virtual machine and go on. However, for virtualization software, you need to download the operating system image file and you can download it from google drive then start the installation. So, follow the below link and learn the complete installation of macOS Mojave on VMware workstation using windows.
In this article, you have learned three methods on How to create MacOS Mojave Bootable USB Installer on Windows. So, follow one by one and check which one is working for you and tell me in the comment box. after that, you have to the instruction to install MacOS Mojave on Virtualbox and VMware. At last, if our article was helpful for you then feel free to put your feedback in the comment box.
If you want to have a clean installation of MacOS High Sierra whether on Mac, Windows, or any other virtualization software then this is the best way to create MacOS High Sierra Bootable USB on Windows without Mac. the method that I am going to guide you is very easy, you don’t need to download and install Unibeast, Transmac, or any other kind of software. Therefore, we will create MacOS High Sierra Bootable USB Via R-Drive Image, only you need to download R-Drive Image and install it on your Windows PC and follow the below steps. However, after you create MacOS High Sierra USB installar then you can go with the installation of High Sierra.
Without installing MacOS High Sierra on Mac, you have other platforms too such as Virtualbox, Vmware, and Hyper-V. these are the platforms where you can easily install MacOS High Sierra but for that, you have to download MacOS High Sierra dmg file or Image file. Although for Windows user this is the best way to go with MacOS High Sierra, However, they are windows user and they don’t have Mac computer but again they are curious to know and use Mac operating system.
How to Create MacOS High Sierra on Windows without Mac
So, without wasting your precious time lets start but before going to create MacOS High Sierra Bootable USB, Make sure you have at least 8GB flash drive and read the article attentively and follow all the steps.
Why Should I Create MacOS High Sierra Bootable USB?
It is better to have the idea behind what we do and why we have to do, as, you have the question why should I create MacOS High Sierra Bootable USB? Listen, without creating MacOS High Sierra USB installer you can install MacOS High Sierra on Mac computer, just go to App Store and download MacOS High Sierra file but what about those users who don’t have Mac PC. Although they can install MacOS High Sierra on Windows without creating MacOS USB installer, only they need to download dmg file for the virtual image.
As our question is a bit serious, here, I let you know that we are creating MacOS High Sierra USB installer because through USB flash drive you can easily install High Sierra or even you will have a clean installation of MacOS High Sierra or any other Mac Operating system. If you know Windows user is installing Windows through USB, So, this is the same way a Mac user can install Mac operating system Via USB easily.
How to Create MacOS High Sierra Bootable USB
Required files:
At Least 8GB Flash Drive
Download MacOS High Sierra from App Store with your Developer Account or DownloadMacOS High Sierra Image file from google drive
Once you download MacOS High Sierra Image file from above link then you need to extract the file. Therefore, open the MacOS High Sierra Image file and Extract .RDR File to your desktop. While the file extracted then click on Switch to and close the Power ISO window.
Extract.RDR file
Step 2: Insert the USB Flash Drive
Now you have to insert your USB flash drive and the USB size should be at least 8GB. but before working on USB you have to format it as FAT32 although you can format it through CMD command or with a menu option. the best method is to format USB through CMD Command. Moreover, follow the steps.
#1: Go to MyComputer and find your USB Drive.
Right-Click on USB and click on Format option.
Select FAT32 (default) for the file system and click on the Start button.
Click OK and wait to complete the format process and close the window.
Format USB Flash Drive
Format USB Via CMD Command:
#1: Press Win + R key and type diskpart and press Enter key.
#2: In CMD prompt type list disk and press Enter.
then select your own USB flash drive, don’t select the wrong drive otherwise you will lose all data which are inside that drive. So, to select the USB type select disk 5.
Then type clean.
and type Exit.
Format USB Via CMD Command
Step 3: Install R-Drive Image
As I mentioned above, you need to download R-Drive Image and after that, you have to install it on your PC, So, if you haven’t download yet then go to required files and download it. Afterward, find the download file and follow the installation steps.
Double-click on the set-up file.
Select Language.
In Welcome page click on Next button.
Agree to the terms of the license agreement and click next.
Click Next.
Then, click on the Install button.
and click Finish.
Step 4: Open R-Drive Image App
Now open R-Drive Image app from desktop and follow the below steps to create MacOS High Sierra Bootable USB. this is the method or application where you can easily create any MacOS Bootable USB. You might know about other methods but what I think this methodology is new for you, so, give it a try and I am sure you will feel at home.
#1: launch R-Drive Image app and click on Next button.
Go Ahead
#2: Here, click on Restore from an Image to select the MacOS High Sierra image file.
Restore from an Image
#3: now select MacOS High Sierra image file that you download later and click next.
Select MacOS High Sierra Image file
#4: After that, select the first option which is Restore disks or partitions and click next.
Restore Disks or Partition
#5: Select Z: 101MB FAT32 and go to the bottom and select your USB flash drive and click next.
FAT32 and Select your USB Flash Drive
#6: In this step, go to the bottom and select FAT32 and Z: and click next.
File System and Drive Letter
#7: Select Add another object and click next.
Add another Object
#8: Now select HFS+ Install MacOS High Sierra then go to the bottom and select your USB flash drive and click next.
Select your USB Flash Drive
#9: Afterward, select HFS+ and Do not connect and click next.
File System and Drive Letter
#10: Now everything is ready to start, therefore, click on the Start button and wait for 15-30 minutes to complete the process.
Congratulation: you have created MacOS High Sierra Bootable USB successfully on Windows without using any software or Mac computer. So, now go to your USB flash drive and check the MacOS High Sierra files. Therefore, now your USB drive is ready to boot MacOS High Sierra and you can install MacOS High Sierra from your USB flash drive.
That’s all about a new method and new idea where you learn how to create MacOS High Sierra Bootable USB on windows without Mac, TransMac, Unibeast, or any other software. with simple steps, you can easily create a bootable USB drive. So, I hope you learn the new method and I am sure this article was helpful for you. In this case, don’t forget to give your feedback and feel free to ask me in the comment box if you get any kind of question.
You all know after MacOS Mojave Apple announced their new and amazing operating system on WWDC 2019 called MacOS Catalina 10.15, However, MacOS Catalina has more user than MacOS Mojave because of its handy features which are amazing for users. Although, the MacOS Catalina public beta was released and it means now you can install macOS Catalina 10.15 on PC-Hackintosh or PC-Macintosh. to install macOS Catalina on Hackintosh is complicated but it will be a great experience for new user to go with it. However, for the new user, it will be tough and confusion but don’t worry here I will guide you everything clearly.
Before going to install MacOS Catalina on PC-Hackintosh, here I will let you now that you can install Catalina on different platforms without installing it on Hackintosh. like you have various virtualization software such as Virtualbox, Vmware Workstation pro, and Hyper-v. but due to Apple releases the public beta that’s why people are curious to install it on their PC Hackintosh. However, installing Catalina on virtualization software will be the easy task and simple, just you need to download MacOS Catalina dmg file for a virtual machine. if you want to know more about the installation of MacOS 10.15 Catalina on virtualization software then follow the link in this article.
How to Install MacOS Catalina on PC-Hackintosh
The mean reason that people prefer MacOS Catalina more than MacOS Mojave because of its new and helpful features. Apple included tons of features and function on macOS Catalina and those features are (improvements to bundled apps like safari, photos, reminders, and notes, the splitting of iTunes into several new apps, and some intriguing new features and capabilities that bundle well with IOS 13 on iPad) and the most useful feature is SideCar that you can use your iPad as a second screen display for MacOS Catalina.
Does Installing MacOS Catalina on PC-Hackintosh is good decision?
Of course yes, if you have Hackintosh PC and you know MacOS Catalina 10.15 public beta was released and now you can download MacOS Catalina from developer account in case if you have Apple ID. However, you have other platforms where you can install Catalina easily but those platforms will not work properly and for that, you have to download MacOS Catalina dmg file otherwise you will not be able to complete the procedure. That’s why I recommend you to install MacOS Catalina 10.15 on your PC Hackintosh.
For a new user, those who are installing MacOS Catalina on PC Hackintosh will be a good experience and somehow it will be tough for them to complete the installation because they don’t know and they don’t have the idea how to install Catalina. don’t be panic, in this article you will learn each and everything related to MacOS Catalina installation on Hackintosh. Therefore, follow the steps and read top to toe in order to not face problems during the installation of MacOS Catalina 10.15.
How to Install MacOS Catalina 10.15 on PC-Hackintosh?
To install MacOS Catalina you will need to download the below requirements file, after that, with a few steps you can install Catalina completely.
You have two ways to download MacOS Catalina 10.15 DMG file.
If you have developer account then you can download MacOS Catalina from App store.
or download MacOS Catalina dmg file without developer account. Direct Link
In case if you have developer account then for sure you can download MacOS Catalina public beta from the app store, if you don’t have developer account then you have to download MacOS Catalina dmg file from a direct link.
However, if you want to download MacOS Catalina with your developer account from Apple store then go ahead and download it. Once you downloaded from app store then the file will be added directly to the App Utilities but those who are downloading the MacoOS Catalina from here then you have to copy and paste it inside the App Utilities or Launcher because it will be needed to create a bootable USB for MacOS Catalina 10.15.
Step 2: Create a Bootable USB for MacOS Catalina 10.15
#1: To create a bootable USB for MacOS Catalina you have to prepare at least 16 GB USB for MacOS Catalina dmg file.
#2: After that, insert the USB to your computer and click on Go > Utilities. the other way, use Command key + space for the spotlight and search Disk Utility then press Enter key.
Open Disk Utility
#3: Now select the USB drive and click on Erase option, after that give a Name, select Mac OS Extended (Journaled) for Format, and select GUID Partition Map for Scheme. Afterward, click on the Erase button. Now wait for a few seconds and click on Done then close the Disk utility.
Select USB
#4: Now open the Spotlight and search Terminal, after that, copy the below code and paste it there and press Enter key, then you will be asked to provide your password, therefore, type your password and press Enter key. Once you press the enter key then it will ask you to Enter Y key for confirmation, so press Y key and wait for a few minutes.
Download the Clover Configurator from the above link.
Now select the Mount EFI option from the left side of the window.
After that, Select the EFI on install MacOS Catalina 10.15 beta and click on Mount Partition.
Enter your Password that you logged in.
Click Done.
Mount EFI
Once you mounted EFI partition then an EFI folder will be generated automatically to your desktop.
Now open EFI external folder.
Copy the EFI file into the external folder.
You have pasted the EFI file successfully, now Eject the external EFI folder. Therefore, right-click on the EFI folder and click on the Eject All.
Glad to see you in this step, as you have done everything properly till here and you created the EFI file of MacOS Catalina in a USB drive. Now you are ready to install MacOS Catalina on PC-Hackintosh but before going to install Catalina you have to copy all fixes files and drivers to a separate USB drive.
Step 4: Create a Post-Installation USB Drive
as I mentioned above that you have to prepare 4GB of USB drive for post-installation files, therefore, insert the USB drive and click on Go and click on Utilities. After that, open Disk Utility folder.
Now select the USB from the left side of the window that you inserted later and click on Erase option from the top-handed panel. After that, follow the below settings.
Select a Name for USB.
Then for Format select Mac OS Extended (Journaled).
And select GUID Partition Map for Scheme.
Now click on the Erase button.
Wait for a minute and click on Done.
At last, close the Disk utility folder.
Once the partition is done, then copy and paste all the fixes drivers into the Post-Install USB drive and Eject the USB drive folder. to eject the driver right click on the USB drive and click on Eject all option.
Step 5: Configure BIOS settings
Here, I tell you that without changing the BIOS setting you will not be able to install MacOS Catalina on your PC, therefore you have to bring some changes to the BIOS setting. for that, restart your computer and press the BIOS setting key. remember, you have to find your computer BIOS key.
#1: After that, go to Save and Edit menu tab then selects Load Optimized Defaults and press Enter, then you will be asked to select Yes button, therefore, select Yes and press enter.
#2: Once again click Save and Edit setup on the same page and click Yes, after that your computer will restart automatically and once your computer restarted then press BIOS setting key.
#3: Now click on the M.I.T menu tab and select the first option and press Enter key.
M.I.T Setting
#4: Once you press enter key then you will see the below screenshot, here select Extreme Memory Profile (X.M.P) and press enter key, then select Profile1 and press enter key.
Extreme Memory Profile (X.M.P)
#5: Now go ahead and click on the Peripherals menu tab and select the USB Configuration and press Enter Key.
USB Configuration
#6: on the same page, select XHCI Hand-off and Enabled this option by pressing the enter key.
XHCI Hand-of
#7: Go ahead and click on Chipset menu tab and Disabled VT-d option by press the enter key.
Chipset
#8: The BIOS Setting for MacOS Catalina has done successfully, now go to Save and Edit menu tab and select the first option and press enter key then Click on Yes button for confirmation.
Save and reset BIOS configuration
Step 6: Install MacOS Catalina on PC-Hackintosh
As you have done the BIOS setting and now it is time to start the installation of MacOS Catalina on PC-Hackintosh, so, before going to install macOS Catalina insert the created bootable USB to your PC and restart your computer. Once your computer restarted then press the Boot menu key. Afterward, you will see the drives list that will appear and now select whether you want to boot MacOS Catalina from USB or CD/DVD., of course, you are going to boot MacOS Catalina from USB, therefore, select the USB drive and go ahead.
#1: Once you selected the USB Bootable drive then you will be in Clover Bootloader window, therefore, select boot MacOS install from installing MacOS 10.15 Beta, So, press Enter to Boot.
#2: After that, in MacOS Utilities choose Disk Utility and click Continue.
#3: Now, go to View menu tab and click on Show all devices.
#4: Afterward, select the USB that you want to boot MacOS Catalina and click on Erase option from the top menu. then give a Name to the USB, select APFS for Format, and select GUID Partition Map for Scheme and click on Erase button and wait to complete the partition and click on Done. at last close the disk utility folder.
Erase the Disk
#5: Now select Install macOS and click on continue.
#6: Go ahead by clicking on the Continue button.
#7: Read the agreement and agree to the terms and conditions of MacOS Catalina and click on Continue.
#8: Now you are going to install Catalina, therefore, select the drive that you have formatted for MacOS Catalina and press Install. So, it will take time and wait for that, once that MacOS Catalina is installed successfully then your computer will restart automatically.
While your computer restarted then press and hold the Boot menu key and again Boot MacOS Catalina 10.15 Beta from a USB drive. Therefore, from the Boot loader menu will come, you have to boot MacOS install from Macintosh HD.
#1: While you select the USB Drive then select Boot MacOS install from Macintosh HD and press Enter then wait for a few minutes to complete the boot installation. Once it is done then your computer will restart automatically.
Boot MacOS Catalina from Macintosh HD
#2: again press and hold boot menu key and select the USB drive where you want to boot MacOS Catalina then press enter key.
#3: you are in the last step of MacOS Catalina installation, therefore, once you select the USB drive then once again boot MacOS from Macintosh HD and press enter to boot.
#4: Now you are in the first installation window, so, select your country and continue.
Go Ahead and continue
If you want to connect your computer to the internet then go ahead if you don’t want then select my computer doesn’t connect to the internet and click continue.
On data and privacy click continue.
Select don’t transfer any information right now and click continue.
If you have Apple ID and want to sign in then provide your Apple ID detail if you don’t have Apple ID then click on Sign up later and click skip.
Read the agreement and agree to the terms and condition.
Now, create a computer account
Give a full Name.
Type your account Name.
provide your password.
and give a password hint
Click Continue.
In the next step, click Continue on Express Set up.
Go ahead and continue.
Click continue for the screen time.
Here, you will have three looks mode, so, select one of them and continue.
Now, wait for the setting up your MacOS Catalina for the first use.
Step 8: Post-Installation Guidance
You have installed macOS Catalina on PC-Hackintosh successfully, now, you have to do a little more steps to complete the full installation. Therefore, go to Finder and click Preferences and check the below boxes, once you checked the boxes then you will see all the hard disk on the desktop screen.
Display the Hard Disk
#1: Now insert your Post-Install USB drive to your computer and open the drive, after that, copy the two folders and paste it on your desktop. once the folders have been copied then eject the Post-Install USB drive.
#2: Then open Post-Install folder that you copied on your desktop and run Clover configurator.
#3: After that, click on the Mount EFI from the left side of the window and Mount both EFI. Click on the first Mount EFI option and provide your password, then click on the second Mount EFI option and provide your password.
Mount Both EFI
#4: Once you mounted both EFI then two folders will be created on your desktop screen by the name of EFI.
#5: So, open EFI partition of the system drive and delete the EFI file.
#6: After that, open the EFI partition of USB drive and copy the EFI file from a USB drive and paste it into EFI partition of the system drive.
#7: Finally, eject the EFI USB drive folder.
#8: Here, you have to open all the fixes drivers such as Audio, Ethernet, Graphics, and other drivers to start installing.
#9: Now, open Ethernet folder and open Kext utility then provide your password, afterward, it will take some time to complete the installation.
#10: Then, drag the Atheros file into Kext utility and enter your password.
#11: Drag the Audio fix, VoodooHDA file into Kext utility and enter your password.
Now, all the drivers installed completely and you need to restart your computer. So, it means you have installed MacOS Catalina 10.15 on PC-Hackintosh successfully and you can run Catalina now and enjoy its features and functions.
The installation of MacOS Catalina on PC-Hackintosh is quite lengthy and somehow difficult but you don’t need to be confused. Simply, follow step by step and read each and everything then I am sure you will get all the steps and you can easily install Catalina on your PC. Therefore, if the article was helpful then don’t forget to give your feedback and subscribe to our blog for more interesting articles.
That’s not an easy task to Dual Boot MacOS Mojave 10.14 with Windows 10 on PC, Although it is possible but it needs quite experience and knowledge to Dual Boot MacOS Mojave. However, MacOS Mojave is a powerful and handy operating system for Mac users. but the question is here, Apple released the new operating system called MacOS Catalina, In fact, MacOS Catalina is the best but not like Mojave. we accept this operating system has more handy features than Mojave but again people are using MacOS Mojave so far to do their task and they are curious to know more about MacOS Mojave functions and features. As you know, in this article, I am going to guide you on How to Dual Boot MacOS Mojave with Windows 10 on single SSD/HDD. To install two operating systems on a single SSD/HDD, However, it can be very tough but it will be very interesting to get a good experience for installing two operating systems at a time.
Although installing or Dual Booting two operating systems on a laptop that having Nvidia Graphics Card is quite hard if you perform this work on Hackintosh it is better and you will not face any issues while Dual Booting Mojave with Windows. So, if your laptop has Nvidia Graphics card then you have noticed while installing or Dual Booting any operating system, you will need more speed and your laptop won’t support that Operating system. Don’t worry, browse to the google and search for the solution and you will get lots of results to solve such issues.
Without wasting time, I will walk you directly on Dual Booting Mac OS Mojave with Windows 10, In this article, I will guide you step by step how to do that and I am sure you will enjoy it.
Step 1: Create macOS Mojave Bootable USB Drive using Disk Utility
The first step is to create MacOS Mojave Bootable USB installer, however, you can use TrasnMac, Disk Utility, and Terminal but the best and easy way is to create a USB installer using Disk Utility. So, let’s start
#1: In the First step, open your Mac Computer and from Menu Tab click on the Go menu and go to Utilities option.
#2: Once you open Utilities then you will see the below screenshot, from here, click on the Disk Utility.
#3: Now you are in Disk Utility, here select the USB drive and click on the Erase button. afterward, give a Name, Select the Format as Mac OS Extended (Journaled), and for Schema select GUID Partition Map. Once you complete this task then click on the Erase button for partition.
#4: While the partition is successfully done then close the Disk Utility. After that, on the right-handed click on the Search Spotlight and type Terminal and press Enter Key from Keyboard.
#5: Now copy and paste the below code on the Terminal and press Enter key then provide your user password and click Enter.
#6: At last, you will be asked If you wish to continue type (Y) then press return Y, Therefore, type Y and press Enter key.
Step 2: Clover Configuration
Now you are in the second step and you have created USB Installer successfully. After that, open Clover Configurator, you can download it from the above link I mentioned, after downloading the clover configurator you will need to copy the MacOS Mojave dmg file. remember, only Mac’s computer can support clover configurator. Therefore, follow the below steps to copy MacOS Mojave 10.14 dmg file.
#1: On the right-handed click on the Search Spotlight then type Clover Configurator and press Enter key from the keyboard.
#2: Now you are in the Clover Configurator here select the USB Drive from the left sidebar and click on the Mount EFI and click on the Mount Partition.
#3: While the partition is created then a new folder will be created on the Desktop, therefore, open the new folder and delete the EFI file.
#4: Once again open EFI folder and paste the EFI file on the folder.
#5: The USB drive is ready and created an installer USB, therefore, right-click and select Eject then Eject All the related Drive to MacOS Mojave 10.14.
Step 3: Post-Installation
I should let you know that this step is the most important portion of MacOS Mojave 10.14, whenever you install MacOS after the installation of every Mac operating system it is important to install all the drivers. therefore, create the USB post-installation with Disk Utility. So, insert the USB and follow the below instructions.
#1: From Menu Bar click on the Go and click on the Utilities option.
#2: After that, click on the Disk utility.
#3: Now select the USB drive and click on Erase option, afterward, give a Name, select Mac OS Extended (Journaled) for format and for schema select GUID Partition Map. then finally click on the Erase button.
#4: Click on Done.
#5: Now the USB drive for Post Installation has been created successfully, therefore, open Post-Install Drive and Copy-paste the important files.
Step 4: BIOS Configuration for Dual-Booting of Both OS
Before installing MacOS Mojave 10.14 on your computer, remember, you have some BIOS configuration for dual booting. without BIOS configuration you are not able to install or dual boot MacOS Mojave with Windows 10 on a single SSD/HDD. Therefore, follow the below steps and focus on each step to not face problems during the installation of windows 10.
#1: At the first step, Restart your PC then press the Delete key to enter BIOS window. after that, on the Save and Exit tab select Load Optimized Defaults then click Yes and press Enter.
#2: After that, Choose Save and Exit then click on Yes button.
#3: After that, your computer will restart then again press the Delete button and go to the BIOS menu and click on Fast Boot and select Disabled.
#4: On the same page, come down and click on Mouse Speed and select 2x.
#5: After choosing Mouse Speed, then click on Windows 8/10 Features and select other OS.
#6: Afterward, click on Storage Boot Control and select Legacy.
#7: While you select Legacy then come down and click on Other PC Devices and select UEFI.
#8: The BIOS configuration has finished, now go to Peripherals and click on Initial Display Output and select PCle 1 Slot.
#9: After that, click on Intel Platform Trust Technology (PTT) and select Disabled option.
#10: Still you need to make changes on Peripherals, therefore, click on USB Configuration and press Enter to take you in the next window.
#11: Click on XHCI Hand-Off and select Enabled.
#12: Then click on SATA and RST configuration and press Enter key from the keyboard.
#13: Now you are in the next window, here click on SATA Mode Selection and select AHCI.
#14: Now jump to Chipset from menu tab and click on VT-d and select Disabled.
#15: this is the last step and now you are done with all the BIOS configuration, to save BIOS configuration, go to Save & Exit from menu tab and click on Save & Exit Setup and click on Yes option.
Step 5: Dual Boot macOS Mojave with Windows 10
In step 5, everything is ready to go ahead and install MacOS Mojave on PC, but the confusion is here, should we install MacOS Mojave at first or Windows 10? However, there will be many conditions that you have to install MacOS Mojave 10.14. Because our PC is well-suited with MacOS Mojave not windows 10, therefore, I prefer you to install Mojave at first. if you install Windows 10 then you might face problems during the installation. therefore, to avoid the errors it will be better to install MacOS Mojave before going to install Windows 10. So, to install MacOS Mojave follow the below steps.
#1: In the first step, insert the USB drive of MacOS Mojave that you created and restart your computer. after restarting press Boot menu button. then from boot device select UEFI: hp v232w PMAP, Partition 1.
#2: then wait for Clover window, after that, select Option and press Enter from keyboard.
#3: Welcome to Clover Boot Manager, therefore, click on the first option which is Boot Args: Type -v nv_disabled=1_ and press Enter key.
#4: In the welcome page, select Boot MacOS Install from MacOS Mojave. therefore, click on the Applelogo.
#5: Bypass Black and White Screen.
#6: Choose Language and click on Continue button.
#7: In MacOS Utilities select Disk Utility and click on Continue button.
#8: Go to View from the menu tab and click on Show All Devices.
#9: While you click on Show All Devices, after that, you will see the drives list. therefore, select the drive that you want to install macOS Mojave and click on Erase. Now give a Name, select APFS for format and for Scheme select GUID Partition Map then click on Erase option.
#10: You have successfully created MacOS Mojave partition, now click on Done button.
Step 6: Install macOS Mojave on Macintosh HD
In this section, we will install MacOS Mojave on Macintosh HD, while pressing the Done button then you will be back on Disk Utilities page. here select the Install MacOS and click on Continue button.
#1: Click on the Continue button.
#2: Read the Terms and Conditions then click on Agree button.
#3: Now select the drive that you created a partition for MacOS Mojave and click on Install.
#4: Wait to complete the installation of MacOS Mojave on Macintosh. Once the installation is done then your computer will restart automatically.
#5: After restarting press Boot Menu and choose boot device, therefore, select UEFI: hp v232w PMAP, Partition 1 and press Enter key.
#6: Now select Boot option and press Enter key from the keyboard.
#7: In front of Boot Args: Type -v nv_disabled=1_ and press Enter.
#8: Now it will ask you to Boot MacOS Install from Macintosh HD, therefore, click on the second Apple logo and press Enter.
#9: Bypass Black and White Screen.
#10: Wait to complete the installation of MacOS Mojave on Macintosh.
#11: Once the installation is done then restart your computer by clicking on the Restart button.
#12: Once again press the Boot menu key while your computer gets to restart and boot MacOS Mojave from UEFI: hp v233w PMAP, Partition 1 then press Enter key.
#13: In the last step of the installation, once again you have to choose Option and press Enter key.
#14: Here, click on the first option which is Boot Args and here type -v and press Enter key two times.
#15: The last step toward installation of MacOS Mojave on Macintosh, therefore, click on the second Apple logo.
#16: Choose your Language and Continue.
#17: Now choose your Country and click on the Continue button.
#18: After that select your keyboard layout and continue.
#19: Go ahead and click on Continue.
#20: Here, I prefer you to not transfer any kind of information to your Mac, therefore, select Don’t transfer any information now and click Continue.
#21: If you have Apple ID then go with it else skip signing in with an Apple ID and continue.
#21: Read the important descriptions and agree to the MacOS software License Agreement, therefore, click on Agree.
#22: Here, you will be asked to create a computer account, therefore, type your Full Name, Account Name, Password and give Hint. afterward, you provide all the requirement then click on Continue.
#23: Go Ahead and Continue.
#24: Choose whether light mode or dark mode and click on Continue.
#24: Now you are done with all the settings and installation of MacOS Mojave, wait for a while to complete the installation.
#1: Now you are in step 7 and you are going to fix some post-installation issues, therefore, insert USB Drive of Post-Installation and launch Clover Configurator.
#2: From clover configurator, you are going to Mount the EFI. By pressing on “Mount Partition” on the selected drive and by entering the Username, and password.
#3: Now EFI installs MacOS EFI on install MacOS Mojave
#4: Now you have to select EFI partition folder of your system and open it then right click and Move to trash.
#5: Open EFI Partition of your USB and copy EFI file.
#6: Now paste the Post Install into EFI drive partition folder.
#7: You are done with Post-Install folder, therefore, eject Post-install folder.
#8: Open Fixes Folder and copy Ethernet fix and Audio Fixes and paste it into Desktop.
#9: Once you paste the Ethernet driver into the desktop, after that, launch the Ethernet Fixes Driver.
#10: Now click Install to perform a standard installation of this software on the disk “Macintosh HD”.
#11: Open Kext Utility.
#12: Now copy VoodooHDA.Kext in Kext Utility Window.
If the Clover Configurator doesn’t work, in that case, install the below other Kexts codes.
For the sound issue, you have to install Voodoohda.
AppleIntelE1000e.kext
AtherosE2200Ethernet.kext
FakeSMC.kext
IntelGraphicsFixup.kext
IntelMausiEthernet.kext
Lilu.kext
NullCPUPowerManagement.kext
Nvidia graphics Fixup.kext
RealtekRTL8111.kext
Shiki.kext
USBInjectAll.kext
VoodooPS2Controller.kext
Step 8: Shrink Volume for Windows 10 installation
A few steps are remaining to complete the Dual Booting of MacOS Mojave with windows 10, although you have done 80% of the steps and you have done all the configuration and installation of MacOS Mojave. so, now it is the time to shrink volume for Windows 10 installation. for that, you will need at least 12GB storage. therefore, follow the below steps and learn how to shrink volume for windows 10.
Search Disk utility on the Search Spotlight.
Then, select the Hard Drive and click on the Partition, Once again click on Partition.
In Partition Information, give a Name, for Format select Mac OS Extended (Journaled), and manage the size. then click Apply.
Now click Partition.
Continue
Then close the Disk utility.
Even you can also create a partition while installing windows 10.
Shrink Volume for Windows 10
Step 9: Daul-Boot MacOS Mojave with Windows 10
Now it is time to Dual Boot MacOS Mojave with Windows 10, However, the installation of Windows 10 is quite easy and simple. I know, more of you have the idea of how to install Windows 10 because this Operating system is handy. So, to install Windows 10, you need to create a bootable USB drive, although we have two ways to create a bootable USB drive for Windows 10 which is CMD and RUFUS. But using CMD you will get a good result, therefore I prefer you to use CMD.
Now, Insert Windows 10 USB installer drive and press Boot menu, after that, select UEFI: SONY Storage Media PMAP, Partition 1 and press Enter key.
Boot Windows 10
Once you select the Boot menu then you will see the welcome window, here select your language and click Next.
Then Click Install.
If you have Windows 10 Serial key then Enter it, if not then skip this step.
After that, read the agreement and Agree to terms and condition and click Next.
Custom: Install Windows only (Advanced).
Then, format the drive and make ready for installation.
Now you have to wait for windows 10 to be installed completely. afterward, the installation is completed then you need to complete the other preferences.
While the installation is done, then install the Drivers for the first time.
Conclusion
In this article, you learn How to Dual Boot MacOS Mojave with Windows 10, Therefore, whatever, you need to know, we have mentioned here and we don’t think a single step has missed. So, we hope you have understood and this article was helpful for you. but if you have any question and confusion then feel free to ask me in the comment box and don’t forget to give your feedback.
Hello, Here I am with the best article which is about How to Run Mac Apps on Windows 10. have you ever think, can we run Mac apps on windows? as you know the Mac Operating System has several handy applications that are the best. but the problem is we can only use Mac apps on Mac computer, I don’t think there can be anyways or software that allows us to use MacOS apps. Don’t worry, in this article, I am going to guide you the best way that you can use Mac apps on windows.
However, we have the best platforms that give us a chance to run MacOS on windows or to run Mac apps on windows PC. Although you know we don’t have any steps to install MacOS on windows without any software, Therefore, we have virtualization software such as Virtualbox, VMware, and Hyper-V. this virtual machine allows you to install Mac OS X on Windows through a driver, image file or USB. Once you installed Mac operating system on your Windows with Virtualbox, after that, you can use or run Mac apps on Windows 10/8/7 PC.
How to run Mac apps on windows 10 PC
If we compare Mac with Windows then Mac has very handy applications rather than Windows. like, FaceTime, Dropzone, Bartender, Magnet, and many more. Therefore, Windows user prefers to run Mac apps on their PC because Windows doesn’t have lots of applications that MacOS has. Moreover, now let’s discuss our title without wasting time.
Why Run Mac Apps on Windows?
The only reason to use Mac apps on windows is, some people don’t have the Mac operating system on their PC or they have Windows operating system but they love to use Mac Apps. In this case, they are curious to learn the steps to use Mac applications.
The second reason can be that Mac OS has amazing apps and handy rather than Windows. Therefore, Windows user wants to install the Mac Operating system through virtualization software and enjoy running Mac apps on their PC. but you might not have an idea how to run and use Mac applications, yeah? you don’t need to be worry because this article will help you to learn the best ways to use Mac apps.
Step 1: Create a MacOS Virtual Machine
The first step to run Mac apps on Windows is to create a MacOS Virtual machine, this is the handy and easiest way to install Mac OS on Windows or to use Mac applications on Windows. to know how to get Mac Operating System on your Windows PC click to the link below and get the idea how to install MacOS on Windows and learn how to run Mac applications on windows with this article.
The installation process is lengthy but don’t worry it will help you to get the Mac operating system on your windows. However, without Virtual Machine we don’t have any other ways to use Mac apps, due to that, we have to install Virtualization software on our windows and afterward install Mac operating system on your virtual machine.
On virtualization software, you can go with any operating system such as Windows, MacOS, and Linux. to install those Operating system you will need to download their image file, later on, install it on your system. check our website and you will get many articles related to the installation of the operating system on the virtual machine. Once you are done with the first step after that follow the second step.
Step 2: Log in with your Apple ID
To download and use Mac apps on the Virtual Machine is quite similar with the actual MacOS, the same process you will need to do. you have to log in with your Apple ID in order to download Mac apps from App Store. if you don’t have Apple ID check the below link and create a new one.
Once you are done with creating Apple ID, afterward, you can start downloading apps from App Store. Therefore Open the App Store from the Dock at the bottom of the screen. After that, search for the Mac application you wish to download and install on your PC. While you find the Application then hit Get and click on the Install button. Wait for some minutes and once the installation is done then open the application and enjoy it on your PC.
With this step, you can download and install applications on MacOS that you installed on windows through virtual Machine. Moreover, the installation of applications is quite easy and it is same with the actual Mac operating system. just you need to install MacOS on your Windows through Virtual Machine.
As you know you are using MacOS on a virtual machine and whatever changes you make it will be saved on Virtual hard drive. So, do you want to save the current state on your MacOS Virtual machine session? it is quite easy and you want to open MacOS virtual machine and continue with Mac application on your windows.
However, the easy and best way to power off the MacOS virtual machine is from within MacOS itself. In both Virtualbox and Vmware, you have an option to power down on command but the problem is with physical hardware. this can cause a problem, in fact, a sudden shutdown on your virtual machine can corrupt the virtual drive. therefore, to shut down your MacOS in the best way is, go to Apple logo and then click on the Shut down option. this is the best way and it will off the MacOS in a correct sequence.
Which is the best Snapshot or Power Off?
As you have two options to off your MacOS virtual machine but the question is here which one is the best for your MacOS? However, the snapshot is handy and the best way to save your current state and it will allow you to create a string of snapshots using Apple apps and MacOS.
Otherwise, if you think your MacOS virtual machine has damage and it is not working properly then with the help of snapshots you can restore the virtual machine as the previous state. So, it means snapshot is the best way to choose for closing MacOS.
However, in Vmware you have snapshot option and you will find it on VM > Snapshot > Take Snapshot. Simply select Vm menu from the top and use snapshot. this will shut down your MacOS and it will save the current state of your MacOS.
In Conclusion
With these steps you are able to run Mac apps on windows 10 PC, as you know we don’t have any other ways to use apple apps on windows, therefore, with the help of virtualization software, you can start using Mac apps on windows. So, I hope this article was helpful for you and if you have any question and confusion then feel free to ask me in the comment box. furthermore, don’t forget to give your feedback about our article.
Forever, we are not with our families, relatives, and friends but there are several major platforms that allow us to contact them. However, you know we have a various social media platform that we can send a message and make a call to our loved one, such as Facebook, Viber, Whatsup, and etc. like this Mac Operating System has FaceTime application where only Mac user can use it and make a call easily. if you are running a Mac operating system then you have a good opportunity to contact your families and other people. How you can do it, in this article, I will guide you on How to Make FaceTime Calls on Mac.
The advantage of FaceTime application is, that it is free and there is no need for money or to pay for a call. only you need to connect your Mac, iPad, iPhone, and iPod with Wifi Internet or LTE data connection. without an internet connection, you can’t call or send message to your relatives, therefore, you should have high-speed wifi or data connection to complete this procedure. Moreover, if your recipients don’t have an internet connection outside then don’t worry they don’t need to pay money for that. just they need only a data connection for the duration of calls.
How to Make FaceTime Calls on Mac
You get the idea about the advantage of FaceTime but now let’s discuss the disadvantage of FaceTime application. However, faceTime application is only available on Mac devices like MacOS, iPhone, iPad, iPod. So, it means that the user that doesn’t have mac operating system then they can’t use FaceTime application or they cannot call through FaceTime. Only Mac user can be in touch with each other and this application is not available on Windows, Linux, and Android. Therefore, if you have a Mac operating system then this article is for you otherwise this is not for you.
Requirements to make FaceTime calls on Mac
If you want to make a FaceTime call on Mac to iPhone, iPad, and iPod then you need the below requirements to complete the procedure. therefore, read the below list and make sure you have completed the requirements to make a FaceTime call.
If you want to make a FaceTime Call to iPhone then make sure your iPhone is running iOS 8 or later.
Make sure your Mac and iPhone are connected with a wifi network connection.
To complete the call you have to sign in with your Apple ID on both devices.
At last, make sure you have turned on the wifi calls on both Mac and iPhone devices.
Turn on Wi-Fi calling on iPhone: go to Settings>iPhone> Wi-Fi calling>slide it on; for iOS 8 or earlier: go to Settings>FaceTime>slide iPhone Cellular call to turn it on.
Turn Wi-Fi calling on Mac: open FaceTime>choose FaceTime>Preferences>choose Calls from iPhone.
Set up FaceTime on Mac
In the first step, you need to set up FaceTime on your Mac, therefore, follow the below steps to complete the setup.
Open FaceTime on your Mac.
Now, enter your Apple ID email address and password then click on the Sign-in button.
If you don’t want to receive calls from the listed email address then uncheck those email.
Make FaceTime Calls on Mac
you might be waiting for how to make FaceTime calls on Mac and you want to know more about FaceTime application, therefore, read and follow the below steps.
Run FaceTime on your Mac.
Here, you have two options whether you want to make a video call or audio call, therefore, select one of the types you want to make a call.
To make a call you need to click on the contact Name, Email, or Number. or entercontact Name, Email or Number into the search bar.
Once you select the recipients then click on the Phone icon or Camera icon to begin the call.
Add Email Address in FaceTime on Mac
there can be sometimes that you have lots of email address to contact them and you want to add their email in FaceTime on your Mac. Therefore, follow the below steps.
open FaceTime Application on Mac.
Click on the FaceTime menu from the left top and go to Preferences.
Now, click on the Add Email button and enter the new email address you want to add.
Choose which Number or Email Address you want to call
Think you have lots of numbers and email address in your contact list and you want to call a few of them, therefore, you have to choose which number and email address you want to call. although, you can call through email or number.
Open FaceTime on your Mac.
Next, click on the FaceTime menu from the menu bar and go to Preferences.
Now, click the drop-down menu next to Start New Calls from.
Then, choose the number or email address you want to start a new call from FaceTime.
Make a group calls on FaceTime
To make a group calls on FaceTime is the favorite of every user, while they are a group of friends and they want to make a group call and have fun then faceTime application give you this chance to make a group calls among your relatives. to do that follow the below steps.
Open FaceTime on Mac, you can find it on Finder > Applications > FaceTime.
To make a call on FaceTime you need to sign in using your Apple ID, after that, type the names of those people you wish to add them in group calls by pressing the Return key on your keyboard after you have selected each participant.
While you have selected all the participants then to start a group FaceTime call, click on the video button if you want to have a video group call or click on the audio button if you want to have an audio group call.
With these steps, you can make group calls among all your relatives and friends. So, this is the step that allows you to make a group calls on FaceTime.
Add another caller during a group FaceTime call
During your group call on FaceTime, you can add another caller on your current group, this is so simple and easy. for example, you have created a group or you have selected participants but you forget one of your friends and it dawns on you during the call, then you can add them during the call with the below steps.
If you would like to add another caller to your current group FaceTime call then find the SideBar icon during the call and click on it.
A list of participants will appear on the left side, and at the bottom find the plus sign icon (+) to add another caller. Type in their name, phone number or email address and click Add at the bottom of the screen. You can add up to 32 people to a group FaceTime audio or video call.
Set your FaceTime Ringtones
You have become bored with the default FaceTime ringtones and you want to set a new one then follow the below steps.
Open FaceTime on Mac.
Click on the Facetime Menu from Menu bar and go to Preferences.
Then, click on the Drop-Down menu next to ringtone.
Here, you have various ringtones, therefore, check one by one and set a new ringtone for your FaceTime Application.
Set your location in FaceTime
If you want to change your FaceTime location or you don’t want to show your real location then follow the below steps and set your location in FaceTime.
Open FaceTime on your Mac.
Click on the FaceTime Menu from Menu Bar and go to Preferences.
After that, click the Drop-Down menu next to Location.
That’s all about How to Make FaceTime Calls on Mac, So, here, I explain everything that you will need on faceTime application or during your call. Therefore, I hope you understand everything and this article is clear for you. Moreover, if you have any question then feel free to ask me in the comment box and don’t forget to give your feedback.
Do you know about SideCar feature or have you use SideCar before? What I think this is the first time you hear the name of SideCar. Therefore, in this article, I will guide you about How to Use SideCar Feature on iPadOS 13. However, we have uploaded article related to How to Use SideCar Feature in MacOS Catalina 10.15 you can check our article and get an idea about SideCar feature. So, Sidecar is the most powerful tools that allow the user to extend Mac’s computer with an iPad or iPod. but the question is here, how you can extend Mac to iPad or iPad to Mac. that’s what I will describe here.
Apple released MacOS Catalina operating system later this year and this is the latest version of macOS. actually, this Operating System has several major features that are handy and powerful. Later on, Apple introduced a new and useful feature which is the best feature called SideCar. However, SideCar will help you to extend your Mac’s computer with your iPad devices. we don’t have such a feature to mirror two devices without any software or any other resources but MacOS Catalina gives this ability to extend Mac to iPad easily. Finally, thanks to Apple company to give this opportunity and make our works easier.
How to Use SideCar Feature on iPadOS 13
With SideCar, you can use your iPad as a second screen display, So, when you connect your Mac with iPad then you will see your Mac screen onto iPad but you have to decide whether you want to mirror the display or extend your Mac screen onto your tablet. So, the below title and paragraph will guide you each and everything about SideCar.
What is SideCar?
Of course, this is the new feature and most of the user don’t know what is SideCar and where to use and how to use. So, SideCar allows the user to extend Mac’s computer with iPad or iPod devices. with this feature, you can mirror your devices and use iPad as a second screen display like Duet Display and Luna Display this is the first feature that Apple introduced for users and I don’t think there will be any powerful feature to extend Mac’s computer with iPad devices without software.
SideCar will be supported by recent models of Mac, if you are using the new version of Mac then you can use Sidecar feature otherwise you will not be able to use SideCar. However, this is the new feature and only recent models can handle this feature. therefore, check the below Mac devices and if your Mac is one of them then for sure you can use SideCar.
MacBook, 2015 and later
iMac, 2012 and later
MacBook Air, 2012 and later
iMac Pro, 2017 and later
MacBook Pro, 2012 and later
Mac Pro, 2013 and later
Mac mini, 2012 and later
Conversely, the following iPads will support iPadOS 13:
12.9-inch iPad Pro
11-inch iPad Pro
10.5-inch iPad Pro
9.7-inch iPad Pro
iPad (5th and 6th generation)
iPad mini (4th and 5th generation)
iPad Air (3rd generation)
iPad Air 2
Did you check the above devices with yours? So, if you have one of them then you can easily use SideCar if you don’t have the above devices then copy the below code and paste in the terminal. this line of code will allow the SideCar to be used. Therefore, open the terminal and paste code then press Enter key.
if you know how to use SideCar in MacOS Catalina then this task is easy for you and you can easily setup SideCar on iPadOS 13. for those, who don’t have the idea then follow the below steps and setup SideCar.
Upgrade your iPad to the latest version.
Go to System Preferences.
After that, click on the SideCar in system preferences.
Look left-side and under Connect to click on Select Device.
Now, choose your iPad from the dropdown menu.
At last, your iPad is connected with Mac, So, now you should see the Mac screen in your Tablet.
How to Display Screen
Once your Mac connected with iPad through SideCar feature, after that, you will need to decide whether you want to mirror the displays or only you want to extend the Mac screen onto your tablet. therefore, if you want to make changes then follow the below steps and decide what you want to see on your tablet.
First Step, you have to tap on the AirPlay icon at the top right on your Mac’s Toolbar.
After that, select Open Displays Preferences from the dropdown menu.
Next step, under AirPlay display, tap the Arrangement tab.
If you want to mirror your Mac screen or to show your Mac screen on your iPad then click the Mirror Displays.
While you want to extend your Mac display onto your iPad then you need to decide which monitor you want to display first, the Mac or iPad. if you want to display Mac screen then drag on the icon that represents the screen or you want iPad screen to come first then drag the iPad screen.
Once you have done with these steps and you want Mac screen to come first then the Mac screen will be on the actual Mac and extends onto your iPad.
Which one Sidebar or Touch Bar?
Well, as I mentioned above that while you connect your Mac and iPad then you will need some configuration to adjust whether you want to display your Mac sidebar or touch bar onto your iPad. therefore, you have to decide which one you wanna test in iPadOS 13 and where you want to put them.
Sidebar:
So what is Sidebar in Mac operating system? actually, the Sidebar is in SideCar where you can find your all most-used controls and modifier keys in apps that support SideCar. Moreover, with Sidebar you can describe your all markup tools and those that let you capture an entire webpage, document, and email. this means, you can screenshot the projects you are working on and you can capture your data like documents, files, and many more.
Touch Bar:
So, now let’s get an idea about Touch Bar. However, the touch bar is the platform where you will find all controls for apps that support Apple’s Touch Bar. although Touch Bar is mostly found on late-generation Macbook Pro models. in this case, the digital Touch bar is available on your iPad, regardless of the type of Mac.
That’s all about how to use SideCar on iPadOS 13 and we have described each and everything that you need to know about SideCar feature, So, I hope you get what we explain and after reading this article you are able to extend your Mac with iPad easily. Moreover, if this article was helpful to you then don’t forget to give your precious idea and feedback.
